geothermal heat pump
 
  Geothermal Heat Pump - Definition, Uses, and Cost  
 
 

If you are interested in reducing your energy consumption by up to seventy percent, you should look into picking up a geothermal heat pump. Considered a major breakthrough when it comes to energy efficient applications, this device is becoming more and more common as the benefits of owning one become more well known. A geothermal heat pump works in a similar way to a refrigerator. It absorbs and dissipates heat through a series of underground pipes buried down into the earth.

The thing that makes geothermal heat pumps so effective is the fact that they are buried deep under the earth. Once you get down in the earth the temperature is always high, no matter what the climate is on the surface above. At the depth that your geothermal heat pump is set at, the temperature is always around 5.5 degrees centigrade. This means that it is an extremely dependable solution for heating your home, as it is not affected by outside temperatures.

In most cases, a geothermal heat pump only needs about one kilowatt of power per hour in order to deliver around 12,000 BTU of cooling or heating. Normal AC systems require about two point two kilowatts of power per hour to produce the same amount of 12,000 BTU, meaning that the geothermal pump is more than two times as effective. According to multiple studies, a geothermal pump can be up to 400 times more efficient than even the most expensive air conditioner systems, and can be 200 times better than the most expensive gas furnaces that you can get on the market today.

As if the energy savings alone were not enough to convince you to buy a geothermal heat pump, there are also multiple other reasons why it is probably your best bet. They do not require much maintenance, and the majority of brands come with ten-year warranties. In most cases, it is very common for a geothermal heat pump to run for decades before you have any issues at all. Customers who were the first to install a geothermal pump in their home have gone on record saying that over a twenty-five year period they have barely had to do any work at all except some small amounts of routine maintenance.

Besides the fact that they work great for decades, geothermal heat pumps also run very quietly. They are incredibly safe as well, meaning that they you can have one installed in your house without and concerns for safety.

The installation procedure is fairly straightforward. If you have a house that sits on flat ground, having the pipes installed is a very simple and easy process. Things get more complicated, however, when you are trying to install a geothermal heat pump on uneven or rocky ground. In these cases, the pipes must be fitted to make sure that there are no issues with operation, which can be a very difficult and tedious process. The more time that must be spent during the installation, the more expensive the process is going to be.

That being said, even if you have to spend a good amount to have a geothermal heat pump installed, you are still going to see savings after a few years. Depending on how tough it was to get the pipes in the ground, a geothermal heat pump can pay for itself in as little to five to ten years. This is because of the energy savings that you will receive. After the first month you should be able to look at your heating and cooling bill and see a noticeable difference in the amount that you owe. Not only are geothermal heat pumps great for your wallet and pocketbook, they are also great for the environment as well.

Numerous studies have shown that a geothermal heat pump will help the environment in the same way that planting up to 750 trees would. That is incredible. Because they are so much better for the environment, federal agencies offer a one-time tax credit for people who have them installed. If you live in the US, the credit is $300. For Canadians, the credit is $3500. If that still is not enough of an incentive to pick one up, there are also various companies that offer loan programs for people who want to have a geothermal pump installed. Power companies are also coming up with great incentives to get people to make the switch as well. This way, even those who cannot afford the entire lump sum right now can still receive the benefits.

A geothermal heat pump can cost you anywhere from $2,000 to $10,000, depending on the brand. There are multiple options available on the market, but two of the top brands are ClimateMaster and Waterfurnace. According to numerous consumer reviews and ratings, the Waterfurnace Envision in three ton is one of the most effective units on the market for the price. That being said, the larger Climatemasters edge out the Waterfurnaces according to some buyers. In most cases, whichever company has come out with the most recent geothermal heat pump is going to be able to deliver the best results.

If you want to reduce your carbon emissions as well as your electricity bill, you should think about having a geothermal heat pump installed in your home. They are the most efficient way to heat and cool your house, and they are also a great investment. Traditional water heaters will get a similar job done, but they cannot match the quality and performance that a geothermal heat pump can offer.


 

 
 
     
 
     
 
 
 
 
     
Copyright 2010 - 2014. All Rights Reserved